Product Description
Upgraded Tikka trigger spring, manufactured in the USA.
- Functions in all Tikka T1X, T3, T3X and Sako 75, 85, A7 models and calibers.
- Reduces trigger pull from factory 4 lb. to a 1.5 lb. average.
- Improved accuracy and overall rifle performance by reducing trigger weight.
- Zinc plated for extreme corrosion resistance.
Instructions
- 1. Ensure rifle is unloaded and all normal safety precautions have been taken.
- 2. Remove barrel and action from stock.
- 3. Remove trigger unit from action, using correct size allen key.
- 4. Remove grub screw at the front of trigger unit which releases spring and plunger with correct size allen key.
- 5. Replace spring with new spring supplied.
- When replacing these parts into the trigger housing, take care to ensure that the trigger spring plunger faces in the same direction as when it was removed.
- 6. Refit plunger, new spring and grub screw.
- 7. Refit trigger unit to action.
- 8. Refit barrel and action to stock.
- 9. With an unloaded rifle use a trigger pull test gauge to check trigger pull is as required and safe.
